Great Lake Offroad LLC :: Axles & Axle Bearings :: Axle - Rear (Both Sides) :: Yukon 1541H alloy rear axle for '80-'90 8.5" GM 4WD truck

Yukon 1541H alloy rear axle for '80-'90 8.5" GM 4WD truck

Yukon 1541H alloy rear axle for '80-'90 8.5" GM 4WD truck
Yukon 1541H alloy rear axle for '80-'90 8.5" GM 4WD truck with a length of 31-1/2" inches and 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.
Details
Part #: YAG14039547
Weight: 18.44 lbs
 
Our price: $175.49
Options:
Quantity (1000 available)

Share |

Recommended products list

4340 Chrome-Moly replacement Axle for Dana 44, Bronco & F150 RH inner, 30 spline, uses 5-760X u/joint, 33.91" long.
4340 Chrome-Moly replacement Axle for Dana 44, Bronco & F150 RH inner, 30 spline, uses 5-760X u/joint, 33.91" long.
Our price: $143.43
USA Standard replacement Ring & Pinion thick gear set for Dana 44 Short Pinion reverse rotation in 4.88
USA Standard replacement Ring & Pinion thick gear set for Dana 44 Short Pinion reverse rotation in 4.88
Our price: $172.28
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 42 housing in a 3.55 ratio
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 42 housing in a 3.55 ratio
Our price: $323.28
Standard open side gear and thrust washer for 9.5" GM
Standard open side gear and thrust washer for 9.5" GM
Our price: $3.92
Yukon Master Overhaul kit for the '99 and newer WJ Model 35 differential
Yukon Master Overhaul kit for the '99 and newer WJ Model 35 differential
Our price: $229.22
O-ring for T100 Zip Locker seal housing
O-ring for T100 Zip Locker seal housing
Our price: $7.41
Yukon Full-floating, 35 spline blank replacement axle shaft for Dana 60, 70, and 80
Yukon Full-floating, 35 spline blank replacement axle shaft for Dana 60, 70, and 80
Our price: $173.72
Seal puller tool
Seal puller tool
Our price: $35.78
Yukon 4340 Chrome Moly replacement rear axle for D60, 30 spline
Yukon 4340 Chrome Moly replacement rear axle for D60, 30 spline
Our price: $222.02
USA Standard Ring & Pinion gear set for Toyota 8" in a 4.88 ratio
USA Standard Ring & Pinion gear set for Toyota 8" in a 4.88 ratio
Our price: $173.45
High performance Yukon replacement Ring & Pinion gear set for Dana 44 in a 5.38 ratio
High performance Yukon replacement Ring & Pinion gear set for Dana 44 in a 5.38 ratio
Our price: $297.79
Front Hub conversion, Scout, 5 X 5.5".
Front Hub conversion, Scout, 5 X 5.5".
Our price: $551.33
Yukon Pinion install kit for Dana 28 differential
Yukon Pinion install kit for Dana 28 differential
Our price: $172.97
Yukon Master Overhaul kit for Dana 53 differential
Yukon Master Overhaul kit for Dana 53 differential
Our price: $390.08
Set up bearing
Set up bearing
Our price: $92.01
Yukon axle for 9.75" '97-'05 E150 van, right hand
Yukon axle for 9.75" '97-'05 E150 van, right hand
Our price: $187.46
Replacement pinion seal for '98 & newer Ford, flanged style
Replacement pinion seal for '98 & newer Ford, flanged style
Our price: $37.53
High performance Yukon Ring & Pinion gear set for GM Chevy 55P in a 3.73 ratio
High performance Yukon Ring & Pinion gear set for GM Chevy 55P in a 3.73 ratio
Our price: $359.79
Redline Synthetic Oil with gasket and nuts, for 8.75" Chrysler.
Redline Synthetic Oil with gasket and nuts, for 8.75" Chrysler.
Our price: $89.59
0.260" diameter cross pin roll pin for 8.75" Chrysler, 8", 9" Ford, and Model 20 and 35.
0.260" diameter cross pin roll pin for 8.75" Chrysler, 8", 9" Ford, and Model 20 and 35.
Our price: $1.55
Yukon Master Overhaul kit for Ford 8.8" LM104911 reverse rotation differential, 35 spline
Yukon Master Overhaul kit for Ford 8.8" LM104911 reverse rotation differential, 35 spline
Our price: $230.65
Bearing race driver
Bearing race driver
Our price: $120.06
4340 Chrome Moly axle, GM Truck & Blazer, Outer Stub, uses 5-760X u/joint
4340 Chrome Moly axle, GM Truck & Blazer, Outer Stub, uses 5-760X u/joint
Our price: $126.80
Pinion depth shims for GM 8.25" IFS, 8.5", 12 bolt car, Ford 8.8" & Chrysler 8.25"
Pinion depth shims for GM 8.25" IFS, 8.5", 12 bolt car, Ford 8.8" & Chrysler 8.25"
Our price: $14.39
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA