Great Lake Offroad LLC :: GLO Tabs & Brackets

American Made GLO Tabs & Brackets

GLO Tabs & Brackets

GLO Tubing Link Mount Tab
Part #:: GLO-AST1
These are 1/4" thick and come as a set of 4 tabs. They come w/ 9/16" hole and are designed to be used w/ 1 3/4" tube but can easily be modified for 1.5" or 2". These parts must be welded to be installed.

Our price:
$15.95
Quantity
GLO Link Bracket Frame Mount Tabs
Part #:: GLO-LFMB1
These are 1/4" thick utilizing a 9/16 hole. Price is for a set of 4 of these tabs which in turn will mount one pair of links to your frame. These are designed to be used on any flat surface such as a frame mount. These can easily be used for johhny or heim style joints. Parts must be welded onto frame.

Our price:
$18.95
Quantity
GLO Lower Four Link Tabs 12 Degree 1 Ton Setup
Part #:: GLO-L4L12DEG
These are 1/4" thick w/ a 9/16" hole built for a standard johnny joint or can be reamed out for a larger heim joints. These are a set of 4 matched @ 12 degree setup so that you can use them for lower links off of a D-60 Dana 60 or similar axles. Realize that 12 degrees is not set in stone and can be manipulated one way or the other very easily. Parts must be welded onto axle.

Our price:
$18.95
Quantity
GLO Standard Shock Mount Bracket 1 ton setup
Part #:: GLO-SHKTBS

Laser cut and formed from ¼” these brackets are designed to fit a standard 1 ton axle. These utilize a standard OEM style design and function. So why try and reuse that rotting bent up set? When for a couple of bucks your can weld on a new set to that upgraded axle under your rig. Quantity of 2 per kit, enough to do one complete axle


Our price:
$19.50
Quantity
GLO Spring Hanger Shackles
Part #:: GLO-SHKLSS3
What you get are two pair (4 pieces) of our laser cut shackles. These are cut from 5/16" plate and utilize 9/16" bolt hole. These can easily be modified to accept 5/8" bolts. Adjustable center to center spacing available please select correct center to center spacing below.

Our price:
$22.95

GLO Link Bracket Frame Mount
Part #:: GLO-BFRM1
These are 1/4" thick w/ a 9/16" hole built for a standard johnny joint or can be reamed out for a larger heim joint. These are a set of 2 brackets matched @ 0 degree setup so that you can use them for links off of any flat mounting frame surface. Realize that 0 degrees is not set in stone and can be manipulated one way or the other very easily. These also work extremely well for mounting a track bar setup to locate your front end frame side. Parts must be welded onto frame.

Our price:
$25.95
Quantity


Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA