GLO Axle Spring Perches
Part #:: GLO-PRCH1
Laser cut from 1/4 inch thick P&O steel plate. They are formed using a 250 ton CNC press brake. Note these are not cheap generic trailer spring mounts. These have been designed to take the severe abuse of hardcore offroading.
SOLD AS PAIR
Our price:
$35.00
GLO Exclusive Chevy Front Dana 60 Top Plates
Part #:: GLO-SPRNG
Exclusive Chevy Front Dana 60 Top Plates
Laser cut P&O 1/2 inch thick steel plate. They are a perfect replacement for the hard to find original front sway bar mounts. These also work well as a base plate for the hydraulic assist conversion.
Laser cut P&O 1/2 inch thick steel plate. They are a perfect replacement for the hard to find original front sway bar mounts. These also work well as a base plate for the hydraulic assist conversion.
Our price:
$35.00
GLO Link Bracket Frame Mount
Part #:: GLO-BFRM1
These are 1/4" thick w/ a 9/16" hole built for a standard johnny joint or can be reamed out for a larger heim joint. These are a set of 2 brackets matched @ 0 degree setup so that you can use them for links off of any flat mounting frame surface. Realize that 0 degrees is not set in stone and can be manipulated one way or the other very easily. These also work extremely well for mounting a track bar setup to locate your front end frame side. Parts must be welded onto frame.
Our price:
$22.95
GLO Link Bracket Frame Mount Tabs
Part #:: GLO-LFMB1
These are 1/4" thick utilizing a 9/16” hole. Price is for a set of 4 of these tabs which in turn will mount one pair of links to your frame. These are designed to be used on any flat surface such as a frame mount. These can easily be used for johhny or heim style joints. Parts must be welded onto frame.
Our price:
$14.95
GLO Lower Four Link Tabs 12 Degree 1 Ton Setup
Part #:: GLO-L4L12DEG
These are 1/4" thick w/ a 9/16" hole built for a standard johnny joint or can be reamed out for a larger heim joints. These are a set of 4 matched @ 12 degree setup so that you can use them for lower links off of a D-60 Dana 60 or similar axles. Realize that 12 degrees is not set in stone and can be manipulated one way or the other very easily. Parts must be welded onto axle.
Our price:
$14.95
GLO Spring Hanger Shackles
Part #:: GLO-SHKLSS3
What you get are two pair (4 pieces) of our laser cut shackles. These are cut from 5/16" plate and utilize 9/16" bolt hole. These can easily be modified to accept 5/8" bolts. Adjustable center to center spacing available please select correct center to center spacing below.
Our price:
$22.95
