Great Lake Offroad LLC :: GLO Extreme Axle Parts :: GLO Rockwell 2.5 ton Top Loader Steer Axle Boot Guards

GLO Rockwell 2.5 ton Top Loader Steer Axle Boot Guards

GLO Rockwell 2.5 ton Top Loader Steer Axle Boot Guards

We start with a single piece of 3/8” plate laser cut and formed to shape. Next we add a ½” thick laser cut hardware guard to the bottom which fully protects not only the pressed in grease zerk but the included new grade 8 socket head caps screws. The unit is then completely welded and last but not least we precision machine the new hardware for a protected flush fit and finish. The added hardware protection is an industry leading first and in our opinion is a necessary requirement. No more grinding or snapping off grease zerks and bolt heads only to have to replace after every trip.


Sold as a Pair

Details
Part #: GLO-RCBT
Weight: 20.00 lbs
 
Our price: $150.00
Options:
Quantity (1000 available)

Share |

Recommended products list

7.75" pinion seal
7.75" pinion seal
Our price: $13.56
Yukon 1541H alloy front leftt hand short side stub axle for GM 9.25" IFS ('88 and newer).
Yukon 1541H alloy front leftt hand short side stub axle for GM 9.25" IFS ('88 and newer).
Our price: $229.18
Stud, knuckle to spindle
Stud, knuckle to spindle
Our price: $2.16
Yukon replacement Ring & Pinion thick gear set for Dana 44 standard rotation, 5.13 ratio
Yukon replacement Ring & Pinion thick gear set for Dana 44 standard rotation, 5.13 ratio
Our price: $287.73
Yukon extra HD aluminum yoke for Chrysler 8.75" with 10 spline pinion and a 7260 U/Joint
Yukon extra HD aluminum yoke for Chrysler 8.75" with 10 spline pinion and a 7260 U/Joint
Our price: $137.24
Yukon standard open carrier case. Ford 9"
Yukon standard open carrier case. Ford 9"
Our price: $152.99
Bearing race driver
Bearing race driver
Our price: $109.43
USA Standard Master Overhaul kit for 2008-2010 Ford 10.5" differentials using aftermarket 10.25" R&P
USA Standard Master Overhaul kit for 2008-2010 Ford 10.5" differentials using aftermarket 10.25" R&P
Our price: $403.73
Ring gear bolt
Ring gear bolt
Our price: $2.32
Yukon 4340 Chrome-Moly right hand inner axle for Dana 30, '67-'71 Ford Bronco, uses 5-760X u/joint
Yukon 4340 Chrome-Moly right hand inner axle for Dana 30, '67-'71 Ford Bronco, uses 5-760X u/joint
Our price: $138.36
Aluminum Girdle replacement Cover for Dana 60 TA HD
Aluminum Girdle replacement Cover for Dana 60 TA HD
Our price: $233.29
High performance Yukon replacement ring & pinion gear set for Dana S110 in a 4.56 ratio.
High performance Yukon replacement ring & pinion gear set for Dana S110 in a 4.56 ratio.
Our price: $1265.37
Pilot bearing for Ford 8"
Pilot bearing for Ford 8"
Our price: $21.45
Yukon steel spool for Dana 60 with 30 spline axles, 4.10 & down
Yukon steel spool for Dana 60 with 30 spline axles, 4.10 & down
Our price: $341.28
Yukon Minor install kit for GM 8.5" Oldsmobile 442 and Cutlass differential
Yukon Minor install kit for GM 8.5" Oldsmobile 442 and Cutlass differential
Our price: $133.58
07 and up Tundra rear 9.5" ring gear bolts W/ 4.0L & 4.7L.
07 and up Tundra rear 9.5" ring gear bolts W/ 4.0L & 4.7L.
Our price: $7.01
Yukon 1541H alloy 5 lug rear axle for 7.5" and 8.8" Ford Crown Victoria (non-ABS)
Yukon 1541H alloy 5 lug rear axle for 7.5" and 8.8" Ford Crown Victoria (non-ABS)
Our price: $189.29
Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer replacement
Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer replacement
Our price: $0.57
Outer replacement seal for Dana 44 and 60 quick disconnect inner axles.
Outer replacement seal for Dana 44 and 60 quick disconnect inner axles.
Our price: $15.74
Conversion bearing for small bearing Ford 9" axle in large bearing housing.
Conversion bearing for small bearing Ford 9" axle in large bearing housing.
Our price: $49.88
Yukon steel spool for Dana 60 with 35 spline axles, 4.56 & up
Yukon steel spool for Dana 60 with 35 spline axles, 4.56 & up
Our price: $298.06
Yukon replacement standard open carrier case for Dana 44, 19 spline, 3.92 & up
Yukon replacement standard open carrier case for Dana 44, 19 spline, 3.92 & up
Our price: $175.93
Spindle nut for Dana 28 & Model 35IFS front for manual locking hub conversion.
Spindle nut for Dana 28 & Model 35IFS front for manual locking hub conversion.
Our price: $13.64
Yukon 1541H alloy rear axle for GM 7.5" Passenger, Monte Carlo and El Camino
Yukon 1541H alloy rear axle for GM 7.5" Passenger, Monte Carlo and El Camino
Our price: $167.05
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA