Great Lake Offroad LLC :: GLO Differential Covers :: GLO GM 14 Bolt Differential Cover

GLO GM 14 Bolt Differential Cover

GLO GM 14 Bolt Differential Cover
Optional Drain Plug Tread Plate Upgrade Basic Cover Bored Mounting Holes Upgraded 1/2" Cover

At GLO we developed the first true two-piece fabricated differential cover on the market. We start by providing a low profile laser cut ½” thick bolt gasket ring as our foundation. The idea was to allow the shaving of many differentials without modifying our cover. Then we add a true one piece ¼” thick laser cut and cnc broke gear cover. To top it off, finally we add a custom machined to our specs fill bung with plug. The plug is an Allen setscrew type plug in a 3/8” national pipe thread which comes in at approx ¾” diameter to fill your fluids. From start to finish we designed this with the best intentions not sacrificing quality in the name of cost and end user satisfaction.

From the start we choose to use a ½” thick bolt ring as our base. My granddad once stated “You don’t put a foundation under an outhouse” and the same theory applies here as well. Once this is fixture welded there is no room for any deflection. The single piece ¼” gear cover just made sense, why weld it from several pieces when one from the start is stronger? Overall uniform strength with less weld areas to create an opportunity to break and tear upon impact. Face it guys, gals these covers are right out in front and need to be able to withstand a hard blunt force trauma. Our two welders have over forty years combined experience to create some of the best looking welds on the planet. The quality in the welds is top notch and you will not be disappointed upon opening your box when it arrives. This cover upon purchase is complete and ready to go to work for you. It does not need to be assembled nor do you need to grind out the welds because they are not up to your standard or what you would expect from a quality fabricated piece. The only option this cover does not have before leaving our shop is to weld this unit up your self. The reason for this is in our warranty. We stand behind every cover we build with our lifetime stamp of approval. You break it we replace it no BS included.

            Many options are available for an additional cost, however please be aware no additional reinforcement or option is required to get you over that next obstacle. Many base model bone stock GLO covers still run some of the harshest races and or trails in the off road world. If there is any question in your mind please refer back to our warranty of every cover we have ever built. I do believe however a product can always be tailored to fit and that is what you will find in our optional add ons for your new cover.

Details
Part #: GLO-14BT1
Weight: 15.00 lbs
 
Our price: $104.10
Options:
Upgrade Mid Plate
Upgrade Entire Cover
Bored Mounting Holes
Cover Texture
Add Drain Plug
Add Upper Truss Tab
Quantity (1000 available)

Share |

Recommended products list

High performance Yukon Ring & Pinion replacement gear set for Dana 44 Reverse rotation in a 3.73 ratio
High performance Yukon Ring & Pinion replacement gear set for Dana 44 Reverse rotation in a 3.73 ratio
Our price: $209.25
Yukon 1541H left hand stub axle for '98 and newer 8.25" IFS.
Yukon 1541H left hand stub axle for '98 and newer 8.25" IFS.
Our price: $155.72
Yukon Hardcore Locking Hub set for Dana 60, 30 spline. '75-'93 Dodge, '77-'91 GM, '78-'97 Ford.
Yukon Hardcore Locking Hub set for Dana 60, 30 spline. '75-'93 Dodge, '77-'91 GM, '78-'97 Ford.
Our price: $400.75
8.8" Ford 7/8" diameter Notched Cross Pin shaft (.875" for '86 and newer).
8.8" Ford 7/8" diameter Notched Cross Pin shaft (.875" for '86 and newer).
Our price: $25.57
Yukon Pinion install kit for GM 8.5" differential for Oldsmobile 442 and Cutlass
Yukon Pinion install kit for GM 8.5" differential for Oldsmobile 442 and Cutlass
Our price: $141.75
Yukon yoke for Model 35 with a 1310 U/Joint size
Yukon yoke for Model 35 with a 1310 U/Joint size
Our price: $70.77
Pinion depth shims for Ford 9"
Pinion depth shims for Ford 9"
Our price: $13.81
Yukon Master Overhaul kit for Dana 44 rear differential for use with new '07+ non-JK Rubicon.
Yukon Master Overhaul kit for Dana 44 rear differential for use with new '07+ non-JK Rubicon.
Our price: $385.43
High performance Yukon replacement Ring & Pinion gear set for Dana 60 in a 4.09 ratio
High performance Yukon replacement Ring & Pinion gear set for Dana 60 in a 4.09 ratio
Our price: $637.05
4340 Chrome-Moly replacement inner axle, 16.17", 35 spline
4340 Chrome-Moly replacement inner axle, 16.17", 35 spline
Our price: $110.48
Samurai REDI-sleeve yoke REPair sleeve for seal surface.
Samurai REDI-sleeve yoke REPair sleeve for seal surface.
Our price: $79.56
Dana 44 Pinion gear Standard Open
Dana 44 Pinion gear Standard Open
Our price: $29.19
USA Standard Pinion installation kit for '99-'08 GM 8.6"
USA Standard Pinion installation kit for '99-'08 GM 8.6"
Our price: $79.02
USA Standard Master Overhaul kit for '10 & up Camaro with V8
USA Standard Master Overhaul kit for '10 & up Camaro with V8
Our price: $371.05
Spindle bearing & seal kit for '93-'96 Ford Dana28, Model 35 IFS & Dana 44 IFS
Spindle bearing & seal kit for '93-'96 Ford Dana28, Model 35 IFS & Dana 44 IFS
Our price: $25.18
USA Standard Ring & Pinion gear set for '10 & down Ford 9.75" in a 3.73 ratio
USA Standard Ring & Pinion gear set for '10 & down Ford 9.75" in a 3.73 ratio
Our price: $323.01
Yukon 1541H alloy rear axle kit for Ford 9" Bronco from '74-'75 with 35 splines
Yukon 1541H alloy rear axle kit for Ford 9" Bronco from '74-'75 with 35 splines
Our price: $456.65
High performance Yukon replacement Ring & Pinion gear set for Dana 36 ICA in a 3.73 ratio
High performance Yukon replacement Ring & Pinion gear set for Dana 36 ICA in a 3.73 ratio
Our price: $412.65
Yukon unit bearing for '96-'00 GM truck, Suburban, Tahoe & Yukon, 8 lug, right hand side, w/ABS.
Yukon unit bearing for '96-'00 GM truck, Suburban, Tahoe & Yukon, 8 lug, right hand side, w/ABS.
Our price: $249.82
Yukon replacement Powr Lok carrier case for Dana 70, 4.10 & down
Yukon replacement Powr Lok carrier case for Dana 70, 4.10 & down
Our price: $524.67
Yukon Minor install kit for GM 8.5" front differential
Yukon Minor install kit for GM 8.5" front differential
Our price: $56.66
Replacement front spindle for Dana 60, 6 holes
Replacement front spindle for Dana 60, 6 holes
Our price: $217.74
Pinion nut
Pinion nut
Our price: $6.65
Yukon Bearing install kit for Dana 80 (4.375" OD only) differential
Yukon Bearing install kit for Dana 80 (4.375" OD only) differential
Our price: $492.79
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA