Great Lake Offroad LLC :: GLO Disc Brake Brackets :: GLO Ford Sterling Disc Brake Conversion Kit

GLO Ford Sterling Disc Brake Conversion Kit

GLO Ford Sterling Disc Brake Conversion Kit
1984 to 1998 Ford Sterling Disc Conversion kit, as with all our other brackets we utilize the inexpensive 1975 chevy 3/4 ton front end parts from a Dana 44 axle. The only difference is that with this kit you will need to source a set of 96 E350 Van rotors (Napa #4886799). One other thing to note is that to use this bracket kit with the 94 - 98 model rears you will need to use the lock washers included with the kit as a spacer for your bracket. This is due to a bearing spec change in which they used a wider bearing so the bracket needs to be offset slightly inboard of the axle tube end flange. You get two laser cut brackets machined / tapped for caliper slide pins and 6 bolts, nuts and lock washers with this kit.
Details
Part #: GLO-BRKST
Weight: 18.00 lbs
 
28%
Market price: $66.50
Our price: $48.00
Options:
Quantity (1000 available)

Share |

Recommended products list

Chrome Cover for 8.8" Ford
Chrome Cover for 8.8" Ford
Our price: $36.34
Yukon 1541H alloy 6 lug rear axle for '91 to '96 Chrysler 8.25" Dakota
Yukon 1541H alloy 6 lug rear axle for '91 to '96 Chrysler 8.25" Dakota
Our price: $212.82
Samurai REDI-sleeve yoke REPair sleeve for seal surface.
Samurai REDI-sleeve yoke REPair sleeve for seal surface.
Our price: $79.56
Yukon standard open spider gear kit for 9" Ford with 31 spline axles and 4-pinion design
Yukon standard open spider gear kit for 9" Ford with 31 spline axles and 4-pinion design
Our price: $210.35
Yukon 7290 short yoke for Model 35.
Yukon 7290 short yoke for Model 35.
Our price: $135.99
Standard open pinion gear and thrust washer for 7.2" GM.
Standard open pinion gear and thrust washer for 7.2" GM.
Our price: $4.75
Crush sleeve eliminator kit for GM 10.5" 14 bolt truck.
Crush sleeve eliminator kit for GM 10.5" 14 bolt truck.
Our price: $62.38
Yukon Minor install kit for Chrysler 9.25" Front
Yukon Minor install kit for Chrysler 9.25" Front
Our price: $45.88
Chrome Cover for 10.5" GM 14 bolt truck
Chrome Cover for 10.5" GM 14 bolt truck
Our price: $36.34
Yukon 1541H alloy replacement rear axle for Dana 60 with a length of 34 to 36.5 inches
Yukon 1541H alloy replacement rear axle for Dana 60 with a length of 34 to 36.5 inches
Our price: $175.49
High performance Yukon Ring & Pinion gear set for Chrylser 8.25" in a 3.55 ratio
High performance Yukon Ring & Pinion gear set for Chrylser 8.25" in a 3.55 ratio
Our price: $284.93
Eaton-type Side Gear, Pinion Gear, and Cross Pin for 55P Chevy. No clutches.
Eaton-type Side Gear, Pinion Gear, and Cross Pin for 55P Chevy. No clutches.
Our price: $222.13
GM 7.5" Standard Open side gear thrust washer.
GM 7.5" Standard Open side gear thrust washer.
Our price: $6.44
Screw adjuster lock for Chrysler 8.25".
Screw adjuster lock for Chrysler 8.25".
Our price: $4.94
Yukon Pinion install kit for Dana 36 ICA Corvette differential
Yukon Pinion install kit for Dana 36 ICA Corvette differential
Our price: $156.33
Steel cover for Ford 10.25"
Steel cover for Ford 10.25"
Our price: $101.25
USA Standard 4340 Chrome-Moly axle kit for '79-'87 GM truck & Blazer, GM 8.5", 30 spline w/Super Joints
USA Standard 4340 Chrome-Moly axle kit for '79-'87 GM truck & Blazer, GM 8.5", 30 spline w/Super Joints
Our price: $918.33
USA Standard Ring & Pinion gear set for '10 & down Ford 9.75" in a 5.13 ratio.
USA Standard Ring & Pinion gear set for '10 & down Ford 9.75" in a 5.13 ratio.
Our price: $271.24
Yukon heavy-duty aluminum pinion support, 28 spline pinion, 10 mounting holes.
Yukon heavy-duty aluminum pinion support, 28 spline pinion, 10 mounting holes.
Our price: $352.75
Replacement side gear thrust washer for Spicer 50
Replacement side gear thrust washer for Spicer 50
Our price: $2.83
Dana 80 & GM/Chrysler 11.5" spindle ID boring tool for 37 & 38 spline axle conversion.
Dana 80 & GM/Chrysler 11.5" spindle ID boring tool for 37 & 38 spline axle conversion.
Our price: $541.39
USA Standard Pinion installation kit for Suzuki Samurai
USA Standard Pinion installation kit for Suzuki Samurai
Our price: $127.45
7.25" Ford crush sleeve. 2.00" long.
7.25" Ford crush sleeve. 2.00" long.
Our price: $17.24
Yukon Master Overhaul kit for Ford 8.8" LM603011 reverse rotation differential, 31 spline
Yukon Master Overhaul kit for Ford 8.8" LM603011 reverse rotation differential, 31 spline
Our price: $230.65
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA