Great Lake Offroad LLC :: GLO Differential Covers :: GLO Ford 8.8 Differential Cover

GLO Ford 8.8 Differential Cover

GLO Ford 8.8 Differential Cover
Optional Drain Plug Tread Plate Upgrade Upgraded 1/2" Cover

At GLO we developed the first true two-piece fabricated differential cover on the market. We start by providing a low profile laser cut ½” thick bolt gasket ring as our foundation. The idea was to allow the shaving of many differentials without modifying our cover. Then we add a true one piece ¼” thick laser cut and cnc broke gear cover. To top it off, finally we add a custom machined to our specs fill bung with plug. The plug is an Allen setscrew type plug in a 3/8” national pipe thread which comes in at approx ¾” diameter to fill your fluids. From start to finish we designed this with the best intentions not sacrificing quality in the name of cost and end user satisfaction.

From the start we choose to use a ½” thick bolt ring as our base. My granddad once stated “You don’t put a foundation under an outhouse” and the same theory applies here as well. Once this is fixture welded there is no room for any deflection. The single piece ¼” gear cover just made sense, why weld it from several pieces when one from the start is stronger? Overall uniform strength with less weld areas to create an opportunity to break and tear upon impact. Face it guys, gals these covers are right out in front and need to be able to withstand a hard blunt force trauma. Our two welders have over forty years combined experience to create some of the best looking welds on the planet. The quality in the welds is top notch and you will not be disappointed upon opening your box when it arrives. This cover upon purchase is complete and ready to go to work for you. It does not need to be assembled nor do you need to grind out the welds because they are not up to your standard or what you would expect from a quality fabricated piece. The only option this cover does not have before leaving our shop is to weld this unit up your self. The reason for this is in our warranty. We stand behind every cover we build with our lifetime stamp of approval. You break it we replace it no BS included.

            Many options are available for an additional cost, however please be aware no additional reinforcement or option is required to get you over that next obstacle. Many base model bone stock GLO covers still run some of the harshest races and or trails in the off road world. If there is any question in your mind please refer back to our warranty of every cover we have ever built. I do believe however a product can always be tailored to fit and that is what you will find in our optional add ons for your new cover.

Details
Part #: GLO-8.89
Weight: 15.00 lbs
 
Our price: $74.00
Options:
Upgrade Mid Plate
Upgrade Entire Cover
Cover Texture
Add Drain Plug
Add Upper Truss Tab
Quantity (1000 available)

Share |

Recommended products list

Replacement pinion seal for Dana 50 late model (SOME 2000 & up) & Dana 30 WJ 01 & up
Replacement pinion seal for Dana 50 late model (SOME 2000 & up) & Dana 30 WJ 01 & up
Our price: $16.11
Yukon 1541H replacement right hand inner axle for Dana 60 ('00 and newer Dodge 2500 & 3500)
Yukon 1541H replacement right hand inner axle for Dana 60 ('00 and newer Dodge 2500 & 3500)
Our price: $237.33
Toyota wheel seal for '80-'97 Full float Landcruiser outer rear, '86-'95 dually pick-up
Toyota wheel seal for '80-'97 Full float Landcruiser outer rear, '86-'95 dually pick-up
Our price: $10.37
High performance Yukon Ring & Pinion gear set for GM 9.25" IFS Reverse rotation in a 3.42 ratio
High performance Yukon Ring & Pinion gear set for GM 9.25" IFS Reverse rotation in a 3.42 ratio
Our price: $265.85
USA Standard Pinion installation kit for Dana 60 front
USA Standard Pinion installation kit for Dana 60 front
Our price: $171.09
Yukon yoke for GM 11.5" with a 1410 U/Joint size
Yukon yoke for GM 11.5" with a 1410 U/Joint size
Our price: $170.93
Yukon Grizzly Locker for GM & Chrysler 11.5" with 38 spline axles
Yukon Grizzly Locker for GM & Chrysler 11.5" with 38 spline axles
Our price: $1223.00
Yukon 1541H alloy rear 5 lug axle for GM 8.5" for '98-'03 4WD S10
Yukon 1541H alloy rear 5 lug axle for GM 8.5" for '98-'03 4WD S10
Our price: $333.70
Pinion seal for C200F IFS front.
Pinion seal for C200F IFS front.
Our price: $49.11
Yukon 1541H cut to fit rear axle shaft for early Ford 8" with 28 splines.
Yukon 1541H cut to fit rear axle shaft for early Ford 8" with 28 splines.
Our price: $190.23
Upper ball joint for Dana 50 & 60
Upper ball joint for Dana 50 & 60
Our price: $36.52
High performance Yukon Ring & Pinion gear set for GM 9.5" in a 4.56 ratio
High performance Yukon Ring & Pinion gear set for GM 9.5" in a 4.56 ratio
Our price: $265.85
Chrome Moly Cross Pin Shaft for Mini-Spool for 9" Ford
Chrome Moly Cross Pin Shaft for Mini-Spool for 9" Ford
Our price: $31.74
Yukon 4340 Chrome-Moly replacement axle kit for Dana 60 '78-'79 Ford SnoFighter, with 35 spline & Yukon Super Joints
Yukon 4340 Chrome-Moly replacement axle kit for Dana 60 '78-'79 Ford SnoFighter, with 35 spline & Yukon Super Joints
Our price: $1375.09
USA Standard steel spool for Dana 60 with 35 spline axles, 4.56 & up
USA Standard steel spool for Dana 60 with 35 spline axles, 4.56 & up
Our price: $285.16
Crush sleeve eliminator kit for Ford 9" for 35 spline pinion.
Crush sleeve eliminator kit for Ford 9" for 35 spline pinion.
Our price: $88.44
Yukon axle for '07 and up 9.5" GM axle, 34.02".
Yukon axle for '07 and up 9.5" GM axle, 34.02".
Our price: $256.66
Pinion nut for Chrysler 300, Charger, Magnum.
Pinion nut for Chrysler 300, Charger, Magnum.
Our price: $27.42
Yukon ring & pinion set for '08 & up Nissan Titan rear, 2.94 ratio.
Yukon ring & pinion set for '08 & up Nissan Titan rear, 2.94 ratio.
Our price: $467.96
Yukon unit bearing for '97-'00 Ford F150 front. Uses 12mm studs.
Yukon unit bearing for '97-'00 Ford F150 front. Uses 12mm studs.
Our price: $161.14
Yukon front 4340 Chrome-Moly replacement axle kit for '79-'93 Dodge, Dana 60 with 30/35 splines
Yukon front 4340 Chrome-Moly replacement axle kit for '79-'93 Dodge, Dana 60 with 30/35 splines
Our price: $1515.11
Yukon steel billet yoke for Chrysler 8.75" with 10 spline pinion and a 7290 U/Joint size
Yukon steel billet yoke for Chrysler 8.75" with 10 spline pinion and a 7290 U/Joint size
Our price: $218.60
Yukon Multi-Shim Driver
Yukon Multi-Shim Driver
Our price: $101.68
Yukon 1541H alloy rear axle for '88-'97 GM 7.5" S10 4WD
Yukon 1541H alloy rear axle for '88-'97 GM 7.5" S10 4WD
Our price: $175.49