Great Lake Offroad LLC :: GLO Differential Covers :: GLO Ford 8.8 Differential Cover

GLO Ford 8.8 Differential Cover

GLO Ford 8.8 Differential Cover
Optional Drain Plug Tread Plate Upgrade Upgraded 1/2" Cover

At GLO we developed the first true two-piece fabricated differential cover on the market. We start by providing a low profile laser cut ½” thick bolt gasket ring as our foundation. The idea was to allow the shaving of many differentials without modifying our cover. Then we add a true one piece ¼” thick laser cut and cnc broke gear cover. To top it off, finally we add a custom machined to our specs fill bung with plug. The plug is an Allen setscrew type plug in a 3/8” national pipe thread which comes in at approx ¾” diameter to fill your fluids. From start to finish we designed this with the best intentions not sacrificing quality in the name of cost and end user satisfaction.

From the start we choose to use a ½” thick bolt ring as our base. My granddad once stated “You don’t put a foundation under an outhouse” and the same theory applies here as well. Once this is fixture welded there is no room for any deflection. The single piece ¼” gear cover just made sense, why weld it from several pieces when one from the start is stronger? Overall uniform strength with less weld areas to create an opportunity to break and tear upon impact. Face it guys, gals these covers are right out in front and need to be able to withstand a hard blunt force trauma. Our two welders have over forty years combined experience to create some of the best looking welds on the planet. The quality in the welds is top notch and you will not be disappointed upon opening your box when it arrives. This cover upon purchase is complete and ready to go to work for you. It does not need to be assembled nor do you need to grind out the welds because they are not up to your standard or what you would expect from a quality fabricated piece. The only option this cover does not have before leaving our shop is to weld this unit up your self. The reason for this is in our warranty. We stand behind every cover we build with our lifetime stamp of approval. You break it we replace it no BS included.

            Many options are available for an additional cost, however please be aware no additional reinforcement or option is required to get you over that next obstacle. Many base model bone stock GLO covers still run some of the harshest races and or trails in the off road world. If there is any question in your mind please refer back to our warranty of every cover we have ever built. I do believe however a product can always be tailored to fit and that is what you will find in our optional add ons for your new cover.

Details
Part #: GLO-8.89
Weight: 15.00 lbs
 
Our price: $74.00
Options:
Upgrade Mid Plate
Upgrade Entire Cover
Cover Texture
Add Drain Plug
Add Upper Truss Tab
Quantity (1000 available)

Share |

Recommended products list

USA Standard Ring & Pinion gear set for Ford 8.8" in a 5.13 ratio
USA Standard Ring & Pinion gear set for Ford 8.8" in a 5.13 ratio
Our price: $190.32
4340 Chrome-Moly replacement inner axle for '88'-98 Ford Dana 60
4340 Chrome-Moly replacement  inner axle for '88'-98 Ford Dana 60
Our price: $136.48
High performance Yukon replacement Ring & Pinion gear set for Dana 80 in a 3.31 ratio
High performance Yukon replacement Ring & Pinion gear set for Dana 80 in a 3.31 ratio
Our price: $806.64
Yukon Master Overhaul kit for Dana 60 and 61 rear differential
Yukon Master Overhaul kit for Dana 60 and 61 rear differential
Our price: $280.66
Yukon Bearing install kit for Toyota T100 and Tacoma differential
Yukon Bearing install kit for Toyota T100 and Tacoma differential
Our price: $321.90
Yukon replacement companion flange for Dana S110.
Yukon replacement companion flange for Dana S110.
Our price: $184.98
3.20MM carrier shim/snap ring for C198 differential.
3.20MM carrier shim/snap ring for C198 differential.
Our price: $16.78
Yukon 1541H alloy 5 lug right hand rear axle for '99-'05 7.5" and 8.8" Ford Ranger
Yukon 1541H alloy 5 lug right hand rear axle for '99-'05  7.5" and 8.8" Ford Ranger
Our price: $160.13
C300 215mm IRS side stub axle seal, 08-11 R/T & SRT8.
C300 215mm IRS side stub axle seal, 08-11 R/T & SRT8.
Our price: $80.58
Yukon replacement axle shaft for Dana S135, 36 spline, 40.5" long.
Yukon replacement axle shaft for Dana S135, 36 spline, 40.5" long.
Our price: $512.55
High performance Yukon Ring & Pinion gear set for Ford 7.5" in a 4.56 ratio
High performance Yukon Ring & Pinion gear set for Ford 7.5" in a 4.56 ratio
Our price: $246.08
USA Standard Master Overhaul kit for the Dana 30 front differential, Grand Cherokee
USA Standard Master Overhaul kit for the Dana 30 front differential, Grand Cherokee
Our price: $211.87
Yukon Bearing install kit for Toyota Turbo 4 and V6 differential
Yukon Bearing install kit for Toyota Turbo 4 and V6 differential
Our price: $322.85
Yukon 1541H alloy right hand rear axle for '05 and newer Ford 9.75" F150 and Expedition
Yukon 1541H alloy right hand rear axle for '05 and newer Ford 9.75" F150 and Expedition
Our price: $207.62
Bearing race driver
Bearing race driver
Our price: $120.06
2011 & up 10.5" Ford pinion seal
2011 & up 10.5" Ford pinion seal
Our price: $25.54
Yukon 1541H alloy rear axle for '88-'97 GM 7.5" S10 4WD
Yukon 1541H alloy rear axle for '88-'97 GM 7.5" S10 4WD
Our price: $175.49
High performance Yukon Ring & Pinion gear set for Model 20 in a 4.11 ratio
High performance Yukon Ring & Pinion gear set for Model 20 in a 4.11 ratio
Our price: $285.57
High performance Yukon Ring & Pinion replacement gear set for Dana 44 in a 4.11 ratio
High performance Yukon Ring & Pinion replacement gear set for Dana 44 in a 4.11 ratio
Our price: $259.42
USA Standard Bearing kit for '08-'10 Ford 10.5" with aftermarket ring & pinion set
USA Standard Bearing kit for '08-'10 Ford 10.5" with aftermarket ring & pinion set
Our price: $252.23
Axle Bearing and Seal kit for C10 Aero truck, 2.800" OD.
Axle Bearing and Seal kit for C10 Aero truck, 2.800" OD.
Our price: $53.36
8.5" Oldsmobile 31Spline 12 BOLT (factory 3.08 or 3.23, or Richmond Gear Ring & Pinions).
8.5" Oldsmobile 31Spline 12 BOLT (factory 3.08 or 3.23, or Richmond Gear Ring & Pinions).
Our price: $605.38
Ford 8" & 9" Standard Open, AG, & Detroit Locker Ring Gear bolt
Ford 8" & 9" Standard Open, AG, & Detroit Locker Ring Gear bolt
Our price: $1.58
Cut to length 30 spline axle shaft for GM 10.5" 14 bolt truck and GM 11.5. 34.8" to 38.8"
Cut to length 30 spline axle shaft for GM 10.5" 14 bolt truck and GM 11.5. 34.8" to 38.8"
Our price: $256.28
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA