Great Lake Offroad LLC :: GLO Disc Brake Brackets

American Made GLO Disc Brake Brackets

GLO Disc Brake Brackets

These are sold in pairs & will complete one rear axle housing.
GLO 14 Bolt Disc Conversion Kit
Part #:: GLO-14BRK

* NEW * 14 Bolt Disc Conversion Kit hardware included

We no longer using DOM tube spacers and now taking up the space w/ 4 small angles that have been laser cut for a precise fit and welded to your brackets. What does this mean? Well for one it means no more having to use a BFH to try and get a bent bracket to line up, only to have your pads wear at a quick uneven pace. Would the pads not lining up correctly causing bad brake performance? The answer is yes and in the long run more money from your pocket. You get two laser cut brackets machined / tapped for caliper slide pins and 8 bolts, nuts and lock washers with this kit.


Our price:
$50.00
Quantity
GLO Dana 60 & 70 Disc Conversion Kit
Part #:: GLO-DSKBR-70
Great Lake Extreme Off-Road also have Dana 60 & 70 disc kits available for the Dodge & Ford models. These brackets allow you to easily and cleanly upgrade to disc brakes for your rear axle application. High strength and good looks together in one beautiful laser cut design from 3/8" thick P&O steel plate. Great Lake uses the more expensive & high quality P&O plate steel which has been acid treated to remove all mill scale. This insures a smooth finish without the possibility of mill scale causing issues when you weld, paint or even powder coat your brackets. Kit also includes new hardware. Note: Please, check your axle tube end mount flange pattern to make sure you order the correct brackets with the correct corresponding bolt pattern. This can be done by measuring the bolts as they stick thru the drum backing plate without removing your wheels. You get two laser cut brackets machined / tapped for caliper slide pins and 6 or 8 (depending on bracket used on your kit) bolts, nuts and lock washers with this kit.

Our price:
$50.00

GLO Ford Sterling Disc Brake Conversion Kit
Part #:: GLO-BRKST
1984 to 1998 Ford Sterling Disc Conversion kit, as with all our other brackets we utilize the inexpensive 1975 chevy 3/4 ton front end parts from a Dana 44 axle. The only difference is that with this kit you will need to source a set of 96 E350 Van rotors (Napa #4886799). One other thing to note is that to use this bracket kit with the 94 - 98 model rears you will need to use the lock washers included with the kit as a spacer for your bracket. This is due to a bearing spec change in which they used a wider bearing so the bracket needs to be offset slightly inboard of the axle tube end flange. You get two laser cut brackets machined / tapped for caliper slide pins and 6 bolts, nuts and lock washers with this kit.

Market price: $66.50 Save 25%
Our price:
$50.00
Quantity


Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA