Great Lake Offroad LLC :: GLO Differential Covers :: GLO Dana 80 Differential Cover

GLO Dana 80 Differential Cover

GLO Dana 80 Differential Cover
Optional Drain Plug Tread Plate Upgrade Basic Cover Bored Mounting Holes Upgraded 1/2" Cover

At GLO we developed the first true two-piece fabricated differential cover on the market. We start by providing a low profile laser cut ½” thick bolt gasket ring as our foundation. The idea was to allow the shaving of many differentials without modifying our cover. Then we add a true one piece ¼” thick laser cut and cnc broke gear cover. To top it off, finally we add a custom machined to our specs fill bung with plug. The plug is an Allen setscrew type plug in a 3/8” national pipe thread which comes in at approx ¾” diameter to fill your fluids. From start to finish we designed this with the best intentions not sacrificing quality in the name of cost and end user satisfaction.

From the start we choose to use a ½” thick bolt ring as our base. My granddad once stated “You don’t put a foundation under an outhouse” and the same theory applies here as well. Once this is fixture welded there is no room for any deflection. The single piece ¼” gear cover just made sense, why weld it from several pieces when one from the start is stronger? Overall uniform strength with less weld areas to create an opportunity to break and tear upon impact. Face it guys, gals these covers are right out in front and need to be able to withstand a hard blunt force trauma. Our two welders have over forty years combined experience to create some of the best looking welds on the planet. The quality in the welds is top notch and you will not be disappointed upon opening your box when it arrives. This cover upon purchase is complete and ready to go to work for you. It does not need to be assembled nor do you need to grind out the welds because they are not up to your standard or what you would expect from a quality fabricated piece. The only option this cover does not have before leaving our shop is to weld this unit up your self. The reason for this is in our warranty. We stand behind every cover we build with our lifetime stamp of approval. You break it we replace it no BS included.

            Many options are available for an additional cost, however please be aware no additional reinforcement or option is required to get you over that next obstacle. Many base model bone stock GLO covers still run some of the harshest races and or trails in the off road world. If there is any question in your mind please refer back to our warranty of every cover we have ever built. I do believe however a product can always be tailored to fit and that is what you will find in our optional add ons for your new cover.

Details
Part #: GLO-801
Weight: 15.00 lbs
 
Our price: $107.00
Options:
Upgrade Mid Plate
Upgrade Entire Cover
Bored Mounting Holes
Cover Texture
Add Drain Plug
Add Upper Truss Tab
Quantity (1000 available)

Share |

Recommended products list

Aluminum Girdle Cover for GM 12 bolt car TA HD
Aluminum Girdle Cover for GM 12 bolt car TA HD
Our price: $254.75
4340 Chrome Moly replacement axle for Dana 44, TJ Rubicon left hand inner
4340 Chrome Moly replacement axle for Dana 44, TJ Rubicon left hand inner
Our price: $112.08
Axle ABS tone ring for '03 & up Crown Victoria, 3.6" diameter, 35 teeth
Axle ABS tone ring for '03 & up Crown Victoria, 3.6" diameter, 35 teeth
Our price: $15.14
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 42 housing in a 3.55 ratio
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 42 housing in a 3.55 ratio
Our price: $298.87
Yukon standard open spider gear kit for 8.2" GM with 28 spline axles
Yukon standard open spider gear kit for 8.2" GM with 28 spline axles
Our price: $215.14
Yukon yoke for Chrysler 9.25" with a 7260 U/Joint size.
Yukon yoke for Chrysler 9.25" with a 7260 U/Joint size.
Our price: $144.54
Yukon outer rear wheel spindle for '65-'82 Corvette
Yukon outer rear wheel spindle for '65-'82 Corvette
Our price: $115.37
Yukon replacement standard open carrier case for Dana 60, 4.56 & up
Yukon replacement standard open carrier case for Dana 60, 4.56 & up
Our price: $156.74
Replacement pinion nut for Dana 25, 27, 30, 36, 44, 53 & GM 7.75"
Replacement pinion nut for Dana 25, 27, 30, 36, 44, 53 & GM 7.75"
Our price: $1.36
Yukon 1541H alloy right hand rear axle for '97-'04 Ford 9.75" (F150 only)
Yukon 1541H alloy right hand rear axle for '97-'04 Ford 9.75" (F150 only)
Our price: $228.33
8.25" IFS (99 & newer) stub axle side seal
8.25" IFS (99 & newer) stub axle side seal
Our price: $35.91
High performance Yukon replacement Ring & Pinion gear set for Dana 60 in a 4.56 ratio
High performance Yukon replacement Ring & Pinion gear set for Dana 60 in a 4.56 ratio
Our price: $292.32
Yukon Gear & Install Kit package for Standard Rotation Dana 60 & 88 & down GM 14T, 4.56 thick.
Yukon Gear & Install Kit package for Standard Rotation Dana 60 & 88 & down GM 14T, 4.56 thick.
Our price: $1393.75
9" Ford Spartan locker cross pin, long
9" Ford Spartan locker cross pin, long
Our price: $31.99
Bearing race driver
Bearing race driver
Our price: $111.18
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8" x 24.
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8" x 24.
Our price: $0.65
USA Standard Bearing kit for '63-'79 Corvette
USA Standard Bearing kit for '63-'79 Corvette
Our price: $172.41
Axle seal for GM 7.5" Astro and Safari van
Axle seal for GM 7.5" Astro and Safari van
Our price: $21.56
USA Standard Ring & Pinion gear set for Toyota 8" in a 4.11 ratio
USA Standard Ring & Pinion gear set for Toyota 8" in a 4.11 ratio
Our price: $199.08
Redline Synthetic Oil with additive, gasket and nuts, for 8.75" Chrysler.
Redline Synthetic Oil with additive, gasket and nuts, for 8.75" Chrysler.
Our price: $94.30
Yukon standard posi spider gear kit for 10.25" Ford with 35 spline axles, fits Eaton design
Yukon standard posi spider gear kit for 10.25" Ford with 35 spline axles, fits Eaton design
Our price: $395.22
Yukon Grizzly Locker for GM & Chrysler 11.5" with 38 spline axles
Yukon Grizzly Locker for GM & Chrysler 11.5" with 38 spline axles
Our price: $1223.00
Pinion depth shim kit for Toyota8", GM 7.5", 8.2" & 12 bolt truck
Pinion depth shim kit for Toyota8", GM 7.5", 8.2" & 12 bolt truck
Our price: $19.90
USA Standard Master Overhaul kit for the Ford 9" LM102910 differential
USA Standard Master Overhaul kit for the Ford 9" LM102910 differential
Our price: $148.96
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA