Great Lake Offroad LLC :: GLO Differential Covers :: GLO Dana 70 Differential Cover

GLO Dana 70 Differential Cover

GLO Dana 70 Differential Cover
Optional Drain Plug Tread Plate Upgrade Basic Cover Bored Mounting Holes Upgraded 1/2" Cover

At GLO we developed the first true two-piece fabricated differential cover on the market. We start by providing a low profile laser cut ½” thick bolt gasket ring as our foundation. The idea was to allow the shaving of many differentials without modifying our cover. Then we add a true one piece ¼” thick laser cut and cnc broke gear cover. To top it off, finally we add a custom machined to our specs fill bung with plug. The plug is an Allen setscrew type plug in a 3/8” national pipe thread which comes in at approx ¾” diameter to fill your fluids. From start to finish we designed this with the best intentions not sacrificing quality in the name of cost and end user satisfaction.

From the start we choose to use a ½” thick bolt ring as our base. My granddad once stated “You don’t put a foundation under an outhouse” and the same theory applies here as well. Once this is fixture welded there is no room for any deflection. The single piece ¼” gear cover just made sense, why weld it from several pieces when one from the start is stronger? Overall uniform strength with less weld areas to create an opportunity to break and tear upon impact. Face it guys, gals these covers are right out in front and need to be able to withstand a hard blunt force trauma. Our two welders have over forty years combined experience to create some of the best looking welds on the planet. The quality in the welds is top notch and you will not be disappointed upon opening your box when it arrives. This cover upon purchase is complete and ready to go to work for you. It does not need to be assembled nor do you need to grind out the welds because they are not up to your standard or what you would expect from a quality fabricated piece. The only option this cover does not have before leaving our shop is to weld this unit up your self. The reason for this is in our warranty. We stand behind every cover we build with our lifetime stamp of approval. You break it we replace it no BS included.

            Many options are available for an additional cost, however please be aware no additional reinforcement or option is required to get you over that next obstacle. Many base model bone stock GLO covers still run some of the harshest races and or trails in the off road world. If there is any question in your mind please refer back to our warranty of every cover we have ever built. I do believe however a product can always be tailored to fit and that is what you will find in our optional add ons for your new cover.

Details
Part #: GLO-701
Weight: 15.00 lbs
 
Our price: $102.00
Options:
Upgrade Mid Plate
Upgrade Entire Cover
Bored Mounting Holes
Cover Texture
Add Drain Plug
Add Upper Truss Tab
Quantity (1000 available)

Share |

Recommended products list

Yukon 1541H left hand inner axle for '79 and newer 8.5" GM truck and Blazer
Yukon 1541H left hand inner axle for '79 and newer 8.5" GM truck and Blazer
Our price: $220.19
High performance Yukon replacement ring & pinion gear set for Dana S135 in a 4.88 ratio.
High performance Yukon replacement ring & pinion gear set for Dana S135 in a 4.88 ratio.
Our price: $1038.12
Powr Lok flat drive plate for Dana 44
Powr Lok flat drive plate for Dana 44
Our price: $16.79
Yukon standard open carrier case, Chrysler 11.5"
Yukon standard open carrier case, Chrysler 11.5"
Our price: $449.56
Yukon Chrome Moly Superjoint, replacement for Dana 60
Yukon Chrome Moly Superjoint, replacement for Dana 60
Our price: $432.36
Yukon Master Overhaul kit for Toyota 7.5" IFS differential, four-cylinder only
Yukon Master Overhaul kit for Toyota 7.5" IFS differential, four-cylinder only
Our price: $220.09
Yukon 1541H alloy 5 lug right hand rear axle for '91-'94 Ford 8.8" Explorer
Yukon 1541H alloy 5 lug right hand rear axle for '91-'94 Ford 8.8" Explorer
Our price: $211.73
Outer axle seal to be used with set10 bearing.
Outer axle seal to be used with set10 bearing.
Our price: $11.34
Yukon 1541H alloy axle for Dana 44 JK Non-Rubicon rear. 30 Spline, 32" long.
Yukon 1541H alloy axle for Dana 44 JK Non-Rubicon rear. 30 Spline, 32" long.
Our price: $196.96
High performance Yukon Ring & Pinion gear set for GM 12 bolt car in a 4.56 ratio
High performance Yukon Ring & Pinion gear set for GM 12 bolt car in a 4.56 ratio
Our price: $378.40
Clutch guide for GM 7.5" & 7.6" Yukon Dura Grip
Clutch guide for GM 7.5" & 7.6" Yukon Dura Grip
Our price: $5.34
Yukon replacement standard open carrier case for Dana 44, 30 spline, 3.92 & up, bare. This case includes carrier shims, roll pin, ring gear bolts and a cover gasket.
Yukon replacement standard open carrier case for Dana 44, 30 spline, 3.92 & up, bare. This case includes carrier shims, roll pin, ring gear bolts and a cover gasket.
Our price: $116.48
Yukon Minor install kit for Dana 44 differential
Yukon Minor install kit for Dana 44 differential
Our price: $87.39
Yukon 4340 Chrome-Moly outer stub for Ford F150, Bronco, Wagoneer (drum brakes), uses 5-760X u/joint
Yukon 4340 Chrome-Moly outer stub for Ford F150, Bronco, Wagoneer (drum brakes), uses 5-760X u/joint
Our price: $134.99
Toyota T100 & Tacoma crush sleeve.
Toyota T100 & Tacoma crush sleeve.
Our price: $5.96
Yukon 1541H alloy rear axle for GM 7.5" Passenger, Monte Carlo and El Camino
Yukon 1541H alloy rear axle for GM 7.5" Passenger, Monte Carlo and El Camino
Our price: $175.49
High performance Yukon Ring & Pinion gear set for Toyota Land Cruiser in a 4.88 ratio
High performance Yukon Ring & Pinion gear set for Toyota Land Cruiser in a 4.88 ratio
Our price: $308.82
Trao Loc spring for Ford 8.8", 28 spline
Trao Loc spring for Ford 8.8", 28 spline
Our price: $31.85
Samurai Spartan locker cross pin short.
Samurai Spartan locker cross pin short.
Our price: $16.35
Yukon Pinion install kit for Dana 44 reverse rotation differential (straight axle, not IFS).
Yukon Pinion install kit for Dana 44 reverse rotation differential (straight axle, not IFS).
Our price: $189.38
Conversion crush sleeve to install '11 & newer Ford 9.75" ring & pinion set into '10 & down housing
Conversion crush sleeve to install '11 & newer Ford 9.75" ring & pinion set into '10 & down housing
Our price: $43.66
USA Standard Bearing kit for Dana 44HD
USA Standard Bearing kit for Dana 44HD
Our price: $125.85
Yukon 1541H alloy replacement right hand rear axle for Dana 44-Super (Hydra-Lok only),
Yukon 1541H alloy replacement right hand rear axle for Dana 44-Super (Hydra-Lok only),
Our price: $368.72
USA Standard Ring & Pinion gear set for Model 20 in a 4.88 ratio
USA Standard Ring & Pinion gear set for Model 20 in a 4.88 ratio
Our price: $198.75
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA