Great Lake Offroad LLC :: GLO Differential Covers :: GLO Dana 60 Differential Cover

GLO Dana 60 Differential Cover

GLO Dana 60 Differential Cover
Optional Drain Plug Tread Plate Upgrade Basic Cover Bored Mounting Holes Upgraded 1/2" Cover

At GLO we developed the first true two-piece fabricated differential cover on the market. We start by providing a low profile laser cut ½” thick bolt gasket ring as our foundation. The idea was to allow the shaving of many differentials without modifying our cover. Then we add a true one piece ¼” thick laser cut and cnc broke gear cover. To top it off, finally we add a custom machined to our specs fill bung with plug. The plug is an Allen setscrew type plug in a 3/8” national pipe thread which comes in at approx ¾” diameter to fill your fluids. From start to finish we designed this with the best intentions not sacrificing quality in the name of cost and end user satisfaction.

From the start we choose to use a ½” thick bolt ring as our base. My granddad once stated “You don’t put a foundation under an outhouse” and the same theory applies here as well. Once this is fixture welded there is no room for any deflection. The single piece ¼” gear cover just made sense, why weld it from several pieces when one from the start is stronger? Overall uniform strength with less weld areas to create an opportunity to break and tear upon impact. Face it guys, gals these covers are right out in front and need to be able to withstand a hard blunt force trauma. Our two welders have over forty years combined experience to create some of the best looking welds on the planet. The quality in the welds is top notch and you will not be disappointed upon opening your box when it arrives. This cover upon purchase is complete and ready to go to work for you. It does not need to be assembled nor do you need to grind out the welds because they are not up to your standard or what you would expect from a quality fabricated piece. The only option this cover does not have before leaving our shop is to weld this unit up your self. The reason for this is in our warranty. We stand behind every cover we build with our lifetime stamp of approval. You break it we replace it no BS included.

            Many options are available for an additional cost, however please be aware no additional reinforcement or option is required to get you over that next obstacle. Many base model bone stock GLO covers still run some of the harshest races and or trails in the off road world. If there is any question in your mind please refer back to our warranty of every cover we have ever built. I do believe however a product can always be tailored to fit and that is what you will find in our optional add ons for your new cover.

Details
Part #: GLO-601
Weight: 15.00 lbs
 
Our price: $107.00
Options:
Upgrade Mid Plate
Upgrade Lower Plate
Upgrade Entire Cover
Bored Mounting Holes
Cover Texture
Add Drain Plug
Add Upper Truss Tab
Quantity (1000 available)

Share |

Recommended products list

Yukon 1541H alloy 5 lug rear axle for '85 to '93 Chrysler 8.25" 2WD truck
Yukon 1541H alloy 5 lug rear axle for '85 to '93 Chrysler 8.25" 2WD truck
Our price: $181.45
Replacement King-Pin for Dana 60
Replacement King-Pin for Dana 60
Our price: $41.41
High performance Yukon Ring & Pinion gear set for Ford 10.25" in a 3.73 ratio
High performance Yukon Ring & Pinion gear set for Ford 10.25" in a 3.73 ratio
Our price: $321.00
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 42 housing in a 4.86 ratio
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 42 housing in a 4.86 ratio
Our price: $274.56
Yukon yoke for Nissan Titan front
Yukon yoke for Nissan Titan front
Our price: $186.41
Yukon standard open spider gear kit for 9" Ford with 31 spline axles and 4-pinion design
Yukon standard open spider gear kit for 9" Ford with 31 spline axles and 4-pinion design
Our price: $210.35
Spartan Locker for Ford 9", 28 or 31 spline.
Spartan Locker for Ford 9", 28 or 31 spline.
Our price: $345.94
Yukon 1541H alloy replacement rear axle kit for Dana 60/Toyota Hybrid
Yukon 1541H alloy replacement rear axle kit for Dana 60/Toyota Hybrid
Our price: $485.77
Yukon 1541H alloy left hand rear axle for Model 35
Yukon 1541H alloy left hand rear axle for Model 35
Our price: $198.96
Replacement Dana 50 pinion seal, 1998-2000 ONLY
Replacement Dana 50 pinion seal, 1998-2000 ONLY
Our price: $19.23
High performance Yukon ring & pinion gear set for '10 & down Ford 10.5" in a 3.55 ratio.
High performance Yukon ring & pinion gear set for '10 & down Ford 10.5" in a 3.55 ratio.
Our price: $265.27
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 89 housing in a 3.55 ratio
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 89 housing in a 3.55 ratio
Our price: $274.57
Yukon Gear & Install Kit package for Jeep XJ with Dana 30 front and Chrysler 8.25” rear, 4.88 ratio.
Yukon Gear & Install Kit package for Jeep XJ with Dana 30 front and Chrysler 8.25” rear, 4.88 ratio.
Our price: $914.33
Yukon aluminum spool for Ford 9" with 40 spline axles, large bearing
Yukon aluminum spool for Ford 9" with 40 spline axles, large bearing
Our price: $378.86
Yukon replacement standard open carrier for Dana S135, bare.
Yukon replacement standard open carrier for Dana S135, bare.
Our price: $471.97
Replacement Pinion depth shims for Dana 60, 61 & D70-U
Replacement Pinion depth shims for Dana 60, 61 & D70-U
Our price: $9.66
Yukon right hand axle for '10-'14 Ford F150 SVT Raptor front, 31 spline.
Yukon right hand axle for '10-'14 Ford F150 SVT Raptor front, 31 spline.
Our price: $308.41
USA standard ring & pinion gear set for Ford 8.8" Reverse rotation in a 4.56 ratio.
USA standard ring & pinion gear set for Ford 8.8" Reverse rotation in a 4.56 ratio.
Our price: $244.98
High performance Yukon replacement Ring & Pinion gear set for Dana 44 standard rotation, 5.13 ratio
High performance Yukon replacement Ring & Pinion gear set for Dana 44 standard rotation, 5.13 ratio
Our price: $268.03
Yukon friction modifier
Yukon friction modifier
Our price: $8.02
Yukon new process 205 end yoke with 32 spline and a 1350 U/Joint size
Yukon new process 205 end yoke with 32 spline and a 1350 U/Joint size
Our price: $141.08
Standard Open side gear and thruster washer for 10.25" Ford.
Standard Open side gear and thruster washer for 10.25" Ford.
Our price: $6.56
Side bearing adjuster ring for 8.25" GM IFS
Side bearing adjuster ring for 8.25" GM IFS
Our price: $79.98
Yukon '79-'93 Mustang Axle kit, 28 Spline, 4 Lug Axles w/ DuraGrip positraction
Yukon '79-'93 Mustang Axle kit, 28 Spline, 4 Lug Axles w/ DuraGrip positraction
Our price: $634.56
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA