Great Lake Offroad LLC :: GLO Differential Covers :: GLO Dana 44 Differential Cover

GLO Dana 44 Differential Cover

GLO Dana 44 Differential Cover
Optional Drain Plug Tread Plate Upgrade Basic Cover Upgraded 1/2" Cover

At GLO we developed the first true two-piece fabricated differential cover on the market. We start by providing a low profile laser cut ½” thick bolt gasket ring as our foundation. The idea was to allow the shaving of many differentials without modifying our cover. Then we add a true one piece ¼” thick laser cut and cnc broke gear cover. To top it off, finally we add a custom machined to our specs fill bung with plug. The plug is an Allen setscrew type plug in a 3/8” national pipe thread which comes in at approx ¾” diameter to fill your fluids. From start to finish we designed this with the best intentions not sacrificing quality in the name of cost and end user satisfaction.

 

From the start we choose to use a ½” thick bolt ring as our base. My granddad once stated “You don’t put a foundation under an outhouse” and the same theory applies here as well. Once this is fixture welded there is no room for any deflection. The single piece ¼” gear cover just made sense, why weld it from several pieces when one from the start is stronger? Overall uniform strength with less weld areas to create an opportunity to break and tear upon impact. Face it guys, gals these covers are right out in front and need to be able to withstand a hard blunt force trauma. Our two welders have over forty years combined experience to create some of the best looking welds on the planet. The quality in the welds is top notch and you will not be disappointed upon opening your box when it arrives. This cover upon purchase is complete and ready to go to work for you. It does not need to be assembled nor do you need to grind out the welds because they are not up to your standard or what you would expect from a quality fabricated piece. The only option this cover does not have before leaving our shop is to weld this unit up your self. The reason for this is in our warranty. We stand behind every cover we build with our lifetime stamp of approval. You break it we replace it no BS included.

 

            Many options are available for an additional cost, however please be aware no additional reinforcement or option is required to get you over that next obstacle. Many base model bone stock GLO covers still run some of the harshest races and or trails in the off road world. If there is any question in your mind please refer back to our warranty of every cover we have ever built. I do believe however a product can always be tailored to fit and that is what you will find in our optional add ons for your new cover.

Details
Part #: GLO-4491
Weight: 15.00 lbs
 
Our price: $107.00
Options:
Upgrade Mid Plate
Upgrade Lower Plate
Upgrade Entire Cover
Cover Texture
Add Drain Plug
Add Upper Truss Tab
Quantity (1000 available)

Share |

Recommended products list

High performance Yukon Ring & Pinion gear set for GM 9.25" IFS Reverse rotation in a 5.13 ratio
High performance Yukon Ring & Pinion gear set for GM 9.25" IFS Reverse rotation in a 5.13 ratio
Our price: $313.11
Ford 72-79 Dana 60 Full Disk Brake Kit w/ E-Brake Calipers
Ford 72-79 Dana 60 Full Disk Brake Kit w/ E-Brake Calipers
Our price: $506.00
Yukon spider gear set for Dana 50 Dura Grip posi, 30 spline.
Yukon spider gear set for Dana 50 Dura Grip posi, 30 spline.
Our price: $234.10
Yukon Minor install kit for Dana 28 differential
Yukon Minor install kit for Dana 28 differential
Our price: $171.53
Yukon yoke for GM 7.5" (mech 3R) in a triple lip design
Yukon yoke for GM 7.5" (mech 3R) in a triple lip design
Our price: $109.75
USA Standard 4340 Chrome-Moly replacement axle kit for '77-'91 GM Dana 60 front, 30 spline w/Super Joints
USA Standard 4340 Chrome-Moly replacement axle kit for '77-'91 GM Dana 60 front, 30 spline w/Super Joints
Our price: $1182.79
Bearing race driver
Bearing race driver
Our price: $62.43
Replacement axle bearing and seal kit for '80 to '93 Dana 60 and Dodge 3/4 ton truck front axle
Replacement axle bearing and seal kit for '80 to '93 Dana 60 and Dodge 3/4 ton truck front axle
Our price: $86.20
GM 12 bolt truck cover gasket
GM 12 bolt truck cover gasket
Our price: $5.88
Yukon 1541H alloy 5 lug rear axle for '80 and '84 Chrysler 9.25" 4WD
Yukon 1541H alloy 5 lug rear axle for '80 and '84 Chrysler 9.25" 4WD
Our price: $315.88
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 42 housing in a 3.73 ratio
High performance Yukon Ring & Pinion gear set for Chrylser 8.75" with 42 housing in a 3.73 ratio
Our price: $381.28
Yukon standard open carrier case, GM 7.625", 3.23 & up
Yukon standard open carrier case, GM 7.625", 3.23 & up
Our price: $209.22
One piece short axles for Model 20 '76-'3 CJ5, and '76-'81 CJ7 with bearings and 29 splines, kit.
One piece short axles for Model 20 '76-'3 CJ5, and '76-'81 CJ7 with bearings and 29 splines, kit.
Our price: $383.31
Yukon Zip Locker for Ford 10.25" & 10.5", full float only.
Yukon Zip Locker for Ford 10.25" & 10.5", full float only.
Our price: $958.59
Axle bearing & seal kit for Astro Van rear
Axle bearing & seal kit for Astro Van rear
Our price: $88.33
Crush sleeve eliminator kit for GM 12 bolt car
Crush sleeve eliminator kit for GM 12 bolt car
Our price: $31.74
Yukon replacement axle shaft for Dana S111, 34 spline, 41.0" long.
Yukon replacement axle shaft for Dana S111, 34 spline, 41.0" long.
Our price: $219.45
High performance Yukon Ring & Pinion gear set for GM 8.25" IFS Reverse rotation in a 3.42 ratio
High performance Yukon Ring & Pinion gear set for GM 8.25" IFS Reverse rotation in a 3.42 ratio
Our price: $339.13
Powr Lok 35 spline side gear for Dana 60 & 70
Powr Lok 35 spline side gear for Dana 60 & 70
Our price: $168.36
Yukon Master Overhaul kit for Chrysler '99 and older 8" IFS differential
Yukon Master Overhaul kit for Chrysler '99 and older 8" IFS differential
Our price: $288.76
Yukon steel spool for Dana 60 with 40 spline axles, 4.56 & up
Yukon steel spool for Dana 60 with 40 spline axles, 4.56 & up
Our price: $309.56
Yukon front 4340 Chrome-Moly replacement axle kit for '82-'86 Dana 30 Jeep CJ
Yukon front 4340 Chrome-Moly replacement axle kit for '82-'86 Dana 30 Jeep CJ
Our price: $641.57
Extra-large clamshells for large applciations.
Extra-large clamshells for large applciations.
Our price: $130.64
Yukon 4340 Chrome Moly alloy axle for Model 35, HD, C/clip, drum brakes, right hand.
Yukon 4340 Chrome Moly alloy axle for Model 35, HD, C/clip, drum brakes, right hand.
Our price: $265.98