Great Lake Offroad LLC :: GLO Differential Covers :: GLO Dana 44 Differential Cover

GLO Dana 44 Differential Cover

GLO Dana 44 Differential Cover
Optional Drain Plug Tread Plate Upgrade Basic Cover Upgraded 1/2" Cover

At GLO we developed the first true two-piece fabricated differential cover on the market. We start by providing a low profile laser cut ½” thick bolt gasket ring as our foundation. The idea was to allow the shaving of many differentials without modifying our cover. Then we add a true one piece ¼” thick laser cut and cnc broke gear cover. To top it off, finally we add a custom machined to our specs fill bung with plug. The plug is an Allen setscrew type plug in a 3/8” national pipe thread which comes in at approx ¾” diameter to fill your fluids. From start to finish we designed this with the best intentions not sacrificing quality in the name of cost and end user satisfaction.

 

From the start we choose to use a ½” thick bolt ring as our base. My granddad once stated “You don’t put a foundation under an outhouse” and the same theory applies here as well. Once this is fixture welded there is no room for any deflection. The single piece ¼” gear cover just made sense, why weld it from several pieces when one from the start is stronger? Overall uniform strength with less weld areas to create an opportunity to break and tear upon impact. Face it guys, gals these covers are right out in front and need to be able to withstand a hard blunt force trauma. Our two welders have over forty years combined experience to create some of the best looking welds on the planet. The quality in the welds is top notch and you will not be disappointed upon opening your box when it arrives. This cover upon purchase is complete and ready to go to work for you. It does not need to be assembled nor do you need to grind out the welds because they are not up to your standard or what you would expect from a quality fabricated piece. The only option this cover does not have before leaving our shop is to weld this unit up your self. The reason for this is in our warranty. We stand behind every cover we build with our lifetime stamp of approval. You break it we replace it no BS included.

 

            Many options are available for an additional cost, however please be aware no additional reinforcement or option is required to get you over that next obstacle. Many base model bone stock GLO covers still run some of the harshest races and or trails in the off road world. If there is any question in your mind please refer back to our warranty of every cover we have ever built. I do believe however a product can always be tailored to fit and that is what you will find in our optional add ons for your new cover.

Details
Part #: GLO-4491
Weight: 15.00 lbs
 
Our price: $107.00
Options:
Upgrade Mid Plate
Upgrade Lower Plate
Upgrade Entire Cover
Cover Texture
Add Drain Plug
Add Upper Truss Tab
Quantity (1000 available)

Share |

Recommended products list

Yukon 4340 Chrome-Moly left hand inner axle for '79-'87 GM 8.5" Blazer and truck, uses 5-760X U/J
Yukon 4340 Chrome-Moly left hand inner axle for '79-'87 GM 8.5" Blazer and truck, uses 5-760X U/J
Our price: $134.99
Axle ABS tone ring for JK 44 rear.
Axle ABS tone ring for JK 44 rear.
Our price: $15.14
USA Standard Ring & Pinion gear set for Ford 10.25" in a 5.13 ratio
USA Standard Ring & Pinion gear set for Ford 10.25" in a 5.13 ratio
Our price: $275.58
Yukon replacement standard open spider gear kit for Dana S135 with 36 spline axles.
Yukon replacement standard open spider gear kit for Dana S135 with 36 spline axles.
Our price: $573.24
Good used Yukon yoke for Ford 9" with 28 spline pinion and a 1330 U/Joint size
Good used Yukon yoke for Ford 9" with 28 spline pinion and a 1330 U/Joint size
Our price: $125.72
USA Standard Master Overhaul kit for the '81 & older GM 7.5" differential
USA Standard Master Overhaul kit for the '81 & older GM 7.5" differential
Our price: $116.46
Yukon Bearing install kit for Ford Daytona 9" differential, LM102910 bearings
Yukon Bearing install kit for Ford Daytona 9" differential, LM102910 bearings
Our price: $168.35
Pinion seal for Toyota 7.5", 8", V6 & T100
Pinion seal for Toyota 7.5", 8", V6 & T100
Our price: $12.35
Yukon 1541H alloy replacement right hand inner axle for Dana 30-Super, WJ
Yukon 1541H alloy replacement right hand inner axle for Dana 30-Super, WJ
Our price: $441.21
8.0IRS Ford stub axle seal.
8.0IRS Ford stub axle seal.
Our price: $29.37
USA standard ring & pinion gear set for '10 & down Ford 10.5" in a 4.56 ratio.
USA standard ring & pinion gear set for '10 & down Ford 10.5" in a 4.56 ratio.
Our price: $208.68
High performance Yukon Ring & Pinion gear set for GM 8.25" IFS Reverse rotation in a 3.42 ratio
High performance Yukon Ring & Pinion gear set for GM 8.25" IFS Reverse rotation in a 3.42 ratio
Our price: $339.13
Short cross pin shaft without block for 9" Ford.
Short cross pin shaft without block for 9" Ford.
Our price: $11.51
USA Standard Bearing kit for '10 & down GM 9.25" IFS front.
USA Standard Bearing kit for  '10 & down GM 9.25" IFS front.
Our price: $231.67
Yukon pullover hoodie, XL
Yukon pullover hoodie, XL
Our price: $28.99
Yukon 1541H alloy 8 lug rear axle for GM 9.5" '81-'95 truck and '83-'96 G30
Yukon 1541H alloy 8 lug rear axle for  GM 9.5" '81-'95 truck and '83-'96 G30
Our price: $276.01
Replacement Crush sleeve for Dana 30 Reverse front JK & Rubicon JK front.
Replacement Crush sleeve for Dana 30 Reverse front JK & Rubicon JK front.
Our price: $12.92
USA standard ring & pinion gear set for Ford 8.8" in a 3.08 ratio.
USA standard ring & pinion gear set for Ford 8.8" in a 3.08 ratio.
Our price: $247.64
High performance Yukon Ring & Pinion gear set for GM 8.6" IRS in a 3.23 ratio
High performance Yukon Ring & Pinion gear set for GM 8.6" IRS in a 3.23 ratio
Our price: $473.03
Thrust washer for GM 9.25" IFS stub shaft.
Thrust washer for GM 9.25" IFS stub shaft.
Our price: $19.58
Spartan Locker for Model 35 with 27 spline axles and a 1.625" carrier, includes heavy-duty cross pin
Spartan Locker for Model 35 with 27 spline axles and a 1.625" carrier, includes heavy-duty cross pin
Our price: $407.14
Yukon Master Overhaul kit for Dana 50 differential, straight axle
Yukon Master Overhaul kit for Dana 50 differential, straight axle
Our price: $361.55
USA Standard 4340 Chrome-Moly replacement axle kit for '69-'80 GM Truck & Blazer, Dana 44 w/Spicer
USA Standard 4340 Chrome-Moly replacement axle kit for '69-'80 GM Truck & Blazer, Dana 44 w/Spicer
Our price: $647.82
GM 10.5' 14 bolt truck cover gasket
GM 10.5' 14 bolt truck cover gasket
Our price: $7.06
Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA