Great Lake Offroad LLC :: All Glow Products

American Made All Glow Products

All Glow Products

GLO AAM 9.25 Front
Part #:: GLO-AAM-9251
Cover found on the front of the 2011 & newer LML GM HD trucks

Market price: $110.00 Save 33%
Our price:
$74.00

GLO Axle Spring Perches
Part #:: GLO-PRCH1

Laser cut from 1/4 inch thick P&O steel plate. They are formed using a 250 ton CNC press brake. Note these are not cheap generic trailer spring mounts. These have been designed to take the severe abuse of hardcore offroading.  

SOLD AS PAIR


Our price:
$38.00

GLO Clocking Ring Dana 300 NP208/241
Part #:: GLO-CLRING

This ring will lay your Dana 300 transfer case flat and are 3/8" thick. Just what you need for that added ground clearance. All hardware included.


Our price:
$54.00

GLO Dana 44 Differential Cover
Part #:: GLO-4491

Dana 44 differential cover, ½” thick bolt ring, true 1 piece formed ¼” gear cover, machined fill bung w/ plug, lifetime no BS no fine print warranty you break it we replace it.


Our price:
$107.00

GLO Dana 60 & 70 Disc Conversion Kit
Part #:: GLO-DSKBR-70
Great Lake Extreme Off-Road also have Dana 60 & 70 disc kits available for the Dodge & Ford models. These brackets allow you to easily and cleanly upgrade to disc brakes for your rear axle application. High strength and good looks together in one beautiful laser cut design from 3/8" thick P&O steel plate. Great Lake uses the more expensive & high quality P&O plate steel which has been acid treated to remove all mill scale. This insures a smooth finish without the possibility of mill scale causing issues when you weld, paint or even powder coat your brackets. Kit also includes new hardware. Note: Please, check your axle tube end mount flange pattern to make sure you order the correct brackets with the correct corresponding bolt pattern. This can be done by measuring the bolts as they stick thru the drum backing plate without removing your wheels. You get two laser cut brackets machined / tapped for caliper slide pins and 6 or 8 (depending on bracket used on your kit) bolts, nuts and lock washers with this kit.

Our price:
$50.00

GLO Dana 60 Differential Cover
Part #:: GLO-601
Dana 60 differential cover, thick bolt ring, true 1 piece formed gear cover, machined fill bung w/ plug, lifetime no BS no fine print warranty you break it we replace it.

Our price:
$107.00

GLO Dana 70 Differential Cover
Part #:: GLO-701
Dana 70 differential cover, thick bolt ring, true 1 piece formed gear cover, machined fill bung w/ plug, lifetime no BS no fine print warranty you break it we replace it.

Our price:
$102.00

GLO Dana 80 Differential Cover
Part #:: GLO-801

Dana 80 differential cover, ½” thick bolt ring, true 1 piece formed ¼” gear cover, machined fill bung w/ plug, lifetime no BS no fine print warranty you break it we replace it.


Our price:
$107.00

GLO DIY Weld On Bead Locks
Part #:: GLO-BDLC1-151

VIEW ALL 16 AVAILBLE STYLES!

These are your standard laser cut (not plasma cut) weld on bead locks cut from ¼” plate. With each wheel kit you get two rings an inner (which is smaller in diameter) that welds into the outer rim lip of your wheel. There is no grinding or cutting off of the outer rim lip needed to install these locks. Our 15” & 16” / 16.5” locks all utilize 32 bolt holes. If you need a 17” set then they jump up to 35 bolt holes per wheel kit. The outer ring is larger in diameter to accommodate the ease of installation. Note: installing of this kit does not increase the overall diameter of your wheel as some kits do, so tearing your tires upon installation is not an issue. 18” or larger wheels call for quote as we have built locks for wheels up to 22” in the past.


Our price:
$60.00



Differential Wizard
Great Lake Extreme Off Road on Pirate 4x4
Great Lake Extreme Off Road Made In The USA